HydraNFC

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

110,00 

SKU: 08EF40FE Category:

Introduction

The HydraNFC is an incredibly powerful and flexible 13.56MHz NFC sniffing/reading/writing/emulating platform for 13.56MHz tags.

The Hydra NFC is less expensive, more powerful/extensible than Proxmark3 Hardware and does not require an FPGA (all is done by the MCU Cortex M4F@168MHz with the help of HydraBus with an ultra-fast unique algorithm to sniff & decode in real-time PICC/PCD NFC cards).

Functionality in a glance

Below is a non-exhaustive list of what the HydraNFC brings to the table.

Ultra-Portable

Only 33 grams and 54x35x13 mm

Full Throttle NFC interaction

Direct Mode 0 access for unrestricted development

Ultra-Capable Out of the Box

Full support for all common NFC cards, real-time sniffing

Technical Specs

In addition to all HydraNFC specifications:

  • Supports Near Field Communication (NFC) Standards NFCIP-1 (ISO/IEC 18092) and NFCIP-2 (ISO/IEC 21481)
  • Completely Integrated Protocol Handling for ISO15693, ISO18000-3, ISO14443A/B, and FeliCa
  • Integrated Encoders, Decoders, and Data Framing for NFC Initiator, Active and Passive Target Operation for All Three-Bit Rates (106 kbps, 212 kbps, 424 kbps) and Card Emulation
  • RF Field Detector With Programmable Wake-Up Levels for NFC Passive Transponder Emulation Operation
  • Programmable System Clock Frequency Output (RF, RF/2, RF/4) from 13.56-MHz Crystal
  • Programmable Modulation Depth
  • Dual Receiver Architecture With RSSI for Elimination of “Read Holes” and Adjacent Reader System or Ambient In-Band Noise Detection
  • Programmable Output Power: +20 dBm (100 mW), +23 dBm (200 mW)
  • Support any protocols under 13.56 MHz with modulation depth OOK (100%) or ASK (from 7% to 30%)
  • Support low-level Direct Mode 0 (Raw RF Sub-Carrier Data Stream) or intermediate level (for special tags, not ISO compliant like MIFARE Classic® …) Special Direct Mode for TX and Direct Mode 1 for RX using ISO encoders/decoders without protocol framing

Detailed functionality

  • Support of microSD (FAT16/FAT32) card up to 32GB
  • Virtual Serial Port access through micro USB with VT100 terminal/shell
  • Basic UID read for Vicinity/ISO15693
  • Basic UID read for ISO14443-A/MIFARE ® card 4 or 7bytes UID
  • Read MIFARE Ultralight® tag content (full dump)
  • Tag Emulation UID ISO14443A & MIFARE Classic® 1K
  • Sniffer mode in an autonomous/stand-alone mode
  • Real-time ISO14443A sniffer mode

What’s included

Hardware

  • 1x HydraBus (60mm x 37mm)
  • 1x HydraNFC Shield
  • 1x Case
  • 1x Pre-tuned Antenna

Shipping & Packaging

  • Each HydraNFC is dispatched from Europe – no need to worry about slow shipping times, import duties or damaged goods.
  • Packed in a sturdy compact box.
  • We provide worldwide shipping with express options.

If you are an educational facility, reseller or need several units, please contact us.

HydraNFC Resources

Technical Documents

  • HydraNFC Wiki
  • Official HydraFW

HydraNFC Tutorials

    • Read UID of an ISO/IEC_14443 Tag
    • Read UID and data of a MIFARE Ultralight® Tag
    • Read UID of an ISO/IEC 15693 Tag
    • Emul ISO14443a Tag
    • Emul MIFARE Ultralight® Tag
    • Emul MIFARE Classic® Tag
    • Unique NFC sniffer design
    • Launch NFC sniffer from console
    • Autonomous/stand-alone sniffer mode
    • Sniffer ISO14443A real-time infinite trace mode
    • Python NFC reader pyNFCReader
    • Init GPIO/SPI
    • Read ISO15693 Tag
    • Read MIFARE Classic® Tag
    • TRF7970A commands

Product Presentation: HydraNFC

HydraNFC: Unboxing and Assembly

HydraNFC: Getting Started

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “HydraNFC”

Your email address will not be published. Required fields are marked *

Feed Compare
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart